Used in Codeplug

When the Regional Governance field is equal to "ACMA", the radio / codeplug supports the "Extended UHF Range 1 Capable" Extended Feature, and this Used in Codeplug field is set to "Permanently Enabled". In this case, the end value of UHF Range 1 extends to 472 MHz.

This feature is always available on applicable radio models with R08.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Ultra Low Power" (ULP) Extended Feature is "Permanently Enabled" and is only available to specially-equipped SRX 2200 combat radios where "Ultra Low Power" appears in the Extended Feature Name column.

Due to the special hardware required to support ULP, source radios / codeplugs which have the "Ultra Low Power" (ULP) Extended Feature can only be Cloned to target radios equipped with this same feature.

The "Ultra Low Power" (ULP) Extended Feature is only available to specially-equipped SRX 2200 radio models having R08.02.00 default codeplugs or later, and an equivalent version of firmware.

However, the same special hardware required to support ULP is re-used in APX™ 6000T tactical radios / codeplugs, where it is included as part of the "APX Tactical" Extended Feature, beginning with R12.01.00 default codeplugs or later, and an equivalent version of firmware.

The "Multiple Emergency Revert" Extended Feature is "Used in Codeplug" = "Yes" When. . .

At Least one Trunking Personality has its Emergency Revert Type field set to "System Revert", and the Emergency System Revert Zone / Emergency System Revert Channel for that same channel are defined (Trunking or Conventional).

OR

At Least one Conventional Personality has its Emergency Revert Type field is set to "Revert Channel", and the Emergency Revert Channel for that same channel  is set to a be Trunking channel.

This feature is always available on applicable radio models with R09.01.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Audible Emergency Beacon Routing" Extended Feature is "Used in Codeplug" = "Yes" when the Audible Emergency Beacon Routing field is set to "Internal Speaker Only"

This feature is always available on applicable radio models with R09.01.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Expanded MDC1200 E & F" Extended Feature is "Used in Codeplug" = "Yes" when at least one MDC Conventional System has its Expanded MDC ID Range field enabled.

This feature is always available on applicable radio models with R10.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

When "APX6000P25" appears in the Extended Feature Name column of the current codeplug, this Used in Codeplug field is set to "Permanently Enabled". This feature also requires the "QA03768-P25 Common Air Interface" option (see the Feature Set page).

Source radios / codeplugs which have the "APX6000P25" Extended Feature can only be Cloned to target radios equipped with this same Extended Feature.

When "Maritime Radio Software" appears in the Extended Feature Name column of the current codeplug, this Used in Codeplug field is set to "Permanently Enabled".

This feature is only available on applicable radio models with R10.01.00 codeplugs or later. This feature must be generated in the factory or added by a Motorola Repair Depot; it cannot be enabled through a FLASHport or Refresh Upgrade.

The "Disable Emergency Call Indications" Extended Feature is "Used in Codeplug" = "Yes" when the Disable Emergency Call Indications field is "Enabled".

This feature is always available on applicable radio models with R10.01.00 codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "MFK Emergency Access" Extended Feature is "Used in Codeplug" = "Yes" when the MFK Press Behavior field is set to "Emergency".

This feature is always available on applicable radio models with R10.01.00 codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Emergency Hot Aux Mic" Extended Feature is "Used in Codeplug" = "Yes" when any of the Hot Aux Mic Activation fields is "Enabled".

This feature is always available on applicable radio models with R11.01.00 codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Audible Emergency Beacon" Extended Feature is "Used in Codeplug" = "Yes" when the Audible Emergency Beacon field is not set to "Disabled".

This feature is always available on applicable radio models with R11.01.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "PASS Alarm Feature Capable" Extended Feature is "Used in Codeplug" = "Yes" when at least one of the current Radio Profiles has its Internal Mic Pass Alarm Filter field or its External Mic Pass Alarm Filter field "Enabled".

This feature is always available on applicable radio models with R13.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

When the radio model is NOT APX3000,

the Active Mic for Bluetooth PTT Capable Extended Feature is "Used in Codeplug" = "Yes" when field Active Mic for RSM PTT is not set as "RSM Mic", Active Mic for Bluetooth PTT is not set as "Bluetooth Mic Only", or Bluetooth Receive Audio is not set as "Bluetooth Speaker".

When the radio model is APX3000,

the Active Mic for Bluetooth PTT Extended Feature is "Used in Codeplug" = "Yes", when field Active Mic for RSM PTT is not set as "RSM Mic", Active Mic for Bluetooth PTT is not set as "Bluetooth Mic", or Bluetooth Receive Audio is not set as "Bluetooth Speaker".

This feature is always available on applicable radio models with R15.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The "Limited ISSI DVRS Operation Capable" Extended Feature is "Used in Codeplug" = "Yes" when the DVRS Hardware Enabled field is checked and Coverage Type of Trunking System is set to "Inter-WACN Roaming".

This feature is always available on applicable radio models with R15.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.

The APX SIngletone Extended Feature is "Used in Codeplug" = "Yes" when the Code Type 1 for Repeater Access Button 1 (RAB1) or PTT and Code Type 2 for Repeater Access Button 2 (RAB2) field is selected as "Singletone".

This feature is always available on applicable radio models with R15.00.00 default codeplugs or later. This feature also requires that the radio be upgraded to the equal version of firmware.